Set the machine for straight stitch, with a stitch length of 3 to 3.5mm. Use a SINGER Topstitching Needle, size 90/14 for medium weight fabrics, or a SINGER Topstitching needle, size 100/16 for heavier fabrics. Sew 1/4″ – 3/8″ from the edge of the fabric.
What is the normal stitch length?
The average stitch length is 2.5mm. This is the typical setting on newer sewing machines. Older machines usually give you a range of about 4 to 60 which tells you how many stitches per inch; the equivalent of 2.5mm is about 10-12 stitches per inch. The smaller the stitch length number, the smaller the stitch.
What should the tension be for a straight stitch?
The dial settings run from 0 to 9, so 4.5 is generally the ‘default’ position for normal straight-stitch sewing. This should be suitable for most fabrics. If you are doing a zig-zag stitch, or another stitch that has width, then you may find that the bobbin thread is pulled through to the top.
What are the settings for a straight stitch?
Basic Settings for Sewing Straight Stitches on a Sewing Machine
- Stitch Length: 2.5mm or 10 (stitches per inch)
- Stitch Width: needle centered over stitch plate*
- Stitch Tension: 4.
What does stitch length mean?
Stitch length is basically how long each stitch is sewn by your sewing machine. Changing the stitch length adjusts the feed dogs, which controls how much fabric is pulled through with each stitch. For a shorter length, less fabric is pulled through. For a longer stitch, more fabric is pulled through.
Why is my bottom stitch not straight?
If your thread is pulled tight on the underside and not forming an even stitch then (counter-intuitively) it’s usually the top thread tension that’s wrong. Sometimes very lightweight fabrics such as sheers can get dragged down into the machine so it’s a good idea to use a straight stitch plate.
Why is my zigzag stitch sewing straight?
If the upper thread appears as a single line, the lower thread is incorrectly threaded. Instead of the appropriate tension being applied to the lower thread, it is pulled through the fabric when the upper thread is pulled up.
What should a straight stitch look like?
When it’s just right, your stitch will look like the one in the middle. The one on the left is too tight, causing the fabric to pucker, while the one on the right is too loose, making the stitches loopy. Here’s the same stitch on the underside of the fabric.
Why is the stitching loose underneath?
Another reason you may experience loose stitches is that the thread tension may be low and may not be tight enough to hold these threads tighter to the fabric. When you experience loose thread, you should readjust your tension to see if it is close enough to stop the loose stitches.
What stitch length should I use when quilting?
The recommended stitch length for machine quilting is 2.5 to 3.0 which is basically 8 – 12 stitches per inch. If you’re new to quilting, it’s best you always use the recommended stitch length.
Why are my sewing stitches gathering?
The thread tension is too tight
Sewn with longer seams when stretched, the thread gathers the fabric, leading to a puckered seam. When re-sewing the part, readjust the thread tension. A high tension may stretch the thread when sewing and cause seam puckering afterwards.
What is the best stitch length for free motion quilting?
Yes, for free motion quilting, set your stitch length to ‘0’. That way your feed dogs won’t be moving while you’re quilting because you don’t need them. Less wear and tear on those parts.
What should I set my sewing machine to?
Most sewing is done in the 2.0 to 2.5 range. If you are foundation paper piecing, you may want to decrease your stitch length so that the paper tears away easier. Top stitching and quilting are usually done in the 3.0 to 3.5 range. Basting and gathering stitches are the longest, from 4.0 – 5.0.
What should my tension be set at for cotton?
Cotton requires a moderate tension setting, usually between three and four.
What is a stitch pattern control?
It allows you to put the needle in the middle of the presser foot when doing straight stitching. Term. Stitch pattern control. Definition. This can be adjusted to make different decorative stitch patterns.