How do you make an 18 inch pillow cover?

How much fabric do I need for an 18 inch pillow?

All you need is half a yard of 45 inch wide fabric to sew an 18 inch pillow cover.

How do you make an 18×18 pillow cover?

To make an envelope pillow cover for an 18×18 pillow form:

  1. Wash and dry your fabric (if it’s a natural fibre fabric) so it doesn’t shrink later on.
  2. You’ll need to cut two pieces of fabric, cut piece A 18×18 inches.
  3. Cut piece B 18×26 inches.
  4. Then cut piece B in half.
  5. Hem one side of each B piece (the longest side).

15.04.2014

How do you make homemade pillow covers?

How to Make an Easy DIY Pillow Cover

  1. Decide on the Size. I first decided what size to make my pillows. …
  2. Measure your Fabric. …
  3. Cut Your Fabric. …
  4. Iron Your Fabric. …
  5. Start Sewing! …
  6. Cut the Corners Off. …
  7. Turn Your Pillow Inside Out, Stuff it, Fluff it and Enjoy!

Should pillow insert be larger than cover?

We generally recommend using inserts that are 2″ larger all around than your finished pillow size. For example if you have an 18×18 pillow cover, you’ll want to use a 20×20 insert. … If the insert is too small, the pillow cover will look saggy.

IT IS INTERESTING:  Should you oil a Janome Sewing Machine?

How much bigger should a pillowcase be than the pillow?

Opt for a pillowcase measuring 1/2 to 1 inch longer than the pillow length and 2 1/2 to 4 inches wider than the pillow width, if you’re buying a ready-made pillowcase.

How do you make a trim with a pillow?

Part 3 of 3: Sewing the Trim into Place

  1. Pin the trim to the edges of the pillow. …
  2. Gather the trim at the corners of the pillow. …
  3. Sew along the edges of the trim to secure it on 1 side. …
  4. Repeat the same stitch on the opposite side if needed. …
  5. Overlap the ends of the trim.

How do you measure a pillow for a cover?

Measure the dimensions of your pillow. To determine the size rectangle you’ll need, add 1 inch (2.5 cm) to the height for the seam allowance, and multiply the length by 2, then add 6 inches (15 cm). (For example, an 18-inch [45.5 cm] pillow insert would require a 19-by-42-inch [48.5 cm by 106.5 cm] rectangle.)

How much material do I need to make a pillow?

Sizing Up Fabric Needs for Pillow Covers

Type of Pillow Dimensions (Length by Width) Amount of Fabric Needed for 1 Pillow Cover (Using 54-inch Wide Fabric with No Pattern Matching)
Square pillow forms 12 x 12 inches 1/3 yard
14 x 14 inches 1/2 yard
16 x 16 inches 1/2 yard
18 x 18 inches 5/8 yard

How do you cover a no sew pillow?

How to Make a No-Sew Pillow Cover

  1. Measure and Cut Fabric. Measure and cut fabric three times as wide and two times as high as the pillow form (Images 1 and 2). …
  2. Cover Pillow Form. Place form in the middle of the fabric piece, and fold over fabric in half to completely cover (Images 1 and 2). …
  3. Tie a Knot.
IT IS INTERESTING:  Best answer: How do I change the speed of my sewing machine?

How do you fill a pillow cover?

Keeping the insert squeezed together with one hand, hold open the pillow cover with the other hand and gently pull the cover over one end of the insert. Continue working the cover over the insert while keeping it squeezed together until you have all four corners of the insert inside the cover.

What can you use for pillow stuffing?

Here are a few suggestions.

  • Old tights or socks. Nylons work great, but woolly ones will do too. …
  • Worn out t-shirts or jumpers. Again, these should be clean. …
  • Tissues or tissue paper. …
  • Newspaper. …
  • Plastic bags. …
  • Packing materials. …
  • Toy stuffing from another toy. …
  • The filling from a pillow.

23.01.2019

Quiltnparty