Quick Answer: What kind of bobbins do Brother sewing machines use?

This machine uses SA156 bobbins which are class 15 type bobbins. Use of any other bobbin may result in injuries or damage to the machine. We recommend the use of Brother genuine parts and accessories.

What size bobbins do Brother sewing machines use?

11.5 Bobbin size – standard size bobbin. Compatible with most Brother Sewing machines and other brands (please check your machines manual for compatibility)

Are class 15 bobbins the same as SA156?

SA156 vs Class 15

While the two bobbins are the same class, Brother has confirmed this, not all Class 15 bobbins will fit in your bobbin area if it is different from the SA 156. … That is close to the 11.7 mm size the brother machine needs. You just have to be careful before you buy as the smaller size may not work.

Do all Brother sewing machines use the same size bobbins?

Plastic bobbins and metal bobbins of the same size can NOT be swapped. Machines are set for a very precise tension setting. If they are set for a lighter plastic bobbin, the tension will change if a heavier metal bobbin is used.

IT IS INTERESTING:  Should I buy a serger or sewing machine?

Are metal bobbins better than plastic?

Unfortunately, you should not do that. The rule of thumb for bobbins is that metal ones are for metal bobbin cases and plastic ones are for plastic bobbin cases. If you try to place a metal bobbin in a plastic bobbin case you may see that the bobbin case wears out a lot faster than it is supposed to.

Do all Singer sewing machines use the same bobbins?

Bobbin Tips & Hints

Use only bobbins that are the same class/style as those that come with your machine – don’t substitute! SINGER® branded bobbins are recommended for best results.

What bobbins does the brother cs6000i use?

This machine uses SA156 bobbins which are class 15 type bobbins.

What size is a Class 15 bobbin?

The Class 15 (A Style) Bobbin:

Its diameter measures approximately 20.3 mm and has a width of approximately 11.7 mm.

What are Class L bobbins?

Style L bobbins are typically used with home sewing embroidery and small commercial sewing machines. Style L is the most common bobbin style used in home sewing machines. Thinner thread sizes, like Tex 16 are normally used for embroidery.

What happens if I use the wrong bobbin?

The short answer is YES! Filling a sewing machine bobbin too tightly can make a plastic bobbin bulge or stretch the thread if you are using a metal bobbin. This may be hard to see but can cause all kinds of problems. Plastic bobbins can become compressed in the center causing the bobbin to distort.

Do Janome and Brother use the same bobbins?

My Janome 7700 uses the same bobbins as my Brother, so it can’t be too specialized. The Janome 1600P takes a different bobbin (flatter). Other than that, I have a 7700, 12000, and a 350E and they take the same as the Brother and lots of other machines like Pfaff, etc.

IT IS INTERESTING:  How many stitches should I cast on for a baby blanket?

Are Singer and Janome bobbins the same?

They are not the same. I tried looking for something local and nothing else but these Janome bobbins fit. The singer needles do work though. 1 of 1 found this helpful.

Do all bobbins fit all sewing machines?

There is no such thing as a universal bobbin, meaning no single bobbin will fit every sewing machine. Some sewing machines tolerate a slightly different bobbin better than others, but using the incorrect bobbin will most likely affect the stitch quality of your project, and could result in damage to your machine.

Can I use metal bobbins in my Janome Sewing Machine?

All top loading Janome sewing machines use the same clear plastic bobbins for proper stitching. Metal bobbins interfere with the magnetic hook system. Good quality thread is also a must!

Quiltnparty