Is my sewing machine needle too long?
If the needle length is too long, the point of the needle may still be in the fabric when the feed dogs begin moving the fabric. This can cause missed stitches, puckering and needle damage. A longer needle may also hit a part of the machine on its downward stroke.
Do all Singer sewing machines use the same needles?
Product Description. Designed to be strong and durable enough for denim fabric hems or industrial zippers, SINGER quality-crafted machine needles are intended for all-purpose use, with regular point needles (red) for use on woven fabrics. These universal, super-strong needles fit all home sewing machines.
What really good sewing book would you recommend?
Five really good sewing books
- Sewing secrets from the fashion industry. If there is one book that has pushed my sewing skills to a whole new level it’s this one. …
- The Sew U books by Wendy Mullen. …
- Sewing with knits by Connie Long. …
- Serger secrets. …
- Reader’s Digest: New complete guide to sewing.
What causes a needle to break on a sewing machine?
Over time, your sewing machine needle can get damaged or bent, especially if you are sewing through thick fabric. If your needle gets too bent, it can hit your feed dogs, throat plate, or bobbin case, and break. To avoid bending your needle, try to slow down while you’re sewing or use a sharper needle.
What is the shank needle?
The shank is the part that seats into your sewing machine; the flat side usually goes towards the back, and the rounded side towards the front. Some specialty needles may have a completely round shank. The shaft is the part of the needle that tapers down from the shank.
Why is my sewing needle too long?
Needle is too long for machine, or not inserted all the way into the needle bar. Take-up spring is bent or broken (have a professional replace the spring). Tension discs are worn so that thread works in a groove. Needle is too fine for size of thread and fabric to be sewn.
How do I know if my bobbin tension is correct?
The thread should unwind just slightly and the bobbin case should drop an inch or two. If the thread unwinds without resistance and the case slips to the floor, your bobbin tension is too loose. If the bobbin case doesn’t budge, your bobbin tension is too tight.
What happens if you use the wrong size sewing machine needle?
But put the wrong needle in your machine, or use the wrong needle for your fabric and/or thread, and all heck breaks loose. You can damage your bobbin hook, throw off the machine’s timing, get puckered seams, break or shred thread, punch holes in your fabric, and, at the very least, produce an inferior stitch.