The tension could be too tight or too loose. Set the tension to the basic thread tension setting or adjust the tension manually. The combination of the needle size, thread size and fabric is incorrect. Be sure to use the correct size needle and thread for the type of fabric that you are sewing.
Why does my sewing machine keep jamming underneath?
However certain you are that the problem with the machine is most likely due to a huge tangled mess of thread in the bobbin underneath the fabric, the most common reason for the jamming is usually the lack of sufficient tension in the upper thread.
How do you fix bobbin tension?
To tighten your bobbin tension, turn the tiny screw on the bobbin case a smidgen clockwise. To loosen bobbin tension, turn the screw counterclockwise. A quarter turn or less is a good place to start.
Why is my sewing machine bunching up?
What should I do if I experience thread bunching? As “thread bunching” occurs on the underside of the fabric, some people think it is due to the lower thread. They check whether the bobbin is sitting correctly in the bobbin case or even replace the bobbin. … On many models, the upper thread tension is set automatically.
Why is my bobbin case keeps popping out?
The most common cause of this problem is when the bobbin holder’s finger isn’t placed in the small groove located in the needle plate. The best solution, therefore, is to ensure your bobbin holder finger is perfectly fitted in the needle plate.
How do I reset my Brother sewing machine?
Reset Your Brother Machine
- Press [Settings]>[All Settings]>[Initial Setup]>[Reset]. If your machine displays the [All Settings] menu on the Home screen, skip the [Settings] menu.
- Swipe up or down or press or to display the type of reset functions, and then press the reset function you want to use. …
- [Machine will reboot after resetting. …
- Press .
What should the tension be on a Brother sewing machine?
The standard tension setting is 4. Start with this, and based on what your test stitching looks like, tighten the tension (below 4) or loosen it (above 4). Typically on Brother machines, to loosen the upper thread tension, turn the dial left. To tighten it, turn the dial right (source).
How do I adjust my Brother sewing machine?
Turn the thread tension dial clockwise to tighten the upper thread tension. If the upper thread is not threaded correctly or the bobbin is not installed correctly, it may not be possible to set the correct thread tension.
What tension should my sewing machine be on?
The dial settings run from 0 to 9, so 4.5 is generally the ‘default’ position for normal straight-stitch sewing. This should be suitable for most fabrics. If you are doing a zig-zag stitch, or another stitch that has width, then you may find that the bobbin thread is pulled through to the top.
What happens when bobbin tension is too tight?
When using a heavy or thick thread in the bobbin, the preset tension might be too tight. This may put too much pressure on the thread as it comes out of the bobbin case and can prevent the bobbin thread from unwinding freely.